Potable water feed unit

• Potable water feed unit as hybrid installation system
• Requires no awkward suction pipes but works only with trouble-free pressure pipes
• For individual installations as well as several houses with only one cistern
• All necessary components in one appliance, compact and ready to plug in
• Open potable water outlet adjustable to backpressure height
• Efficient pressure pump with low current consumption and low noise
• Simple to install, no wall mounting necessary
• Pump out of the cistern included in price
• Reliable operation

Multi-siphon

with integrated backpressure stop, therefore essential for all cisterns!

• Prevents entry of drain smells into the cistern
• Of impact-resistant ABS plastic, small animal protection of stainless-steel
• 6 litre water volume
• Tilting resistant through supporting device
• Easy maintenance
• Supplied with/without small animal protection and backpressure stop

Sealing wall openings

• For sealing openings in house and cistern walls
• Of 30 mm thick rubber plate with 2 stainless-steel plates and bolts
• With specified drillings for cable protection tube, pressure or suction pipe, potable water feed tube (WD 150)
• Self-acting sealing of unused wall openings already drilled
• Integrated electrical sealing
• Easy installation with the flexible WISY pipe laying system
• supplied in 3 sizes: WD 150, WD 110, WD 100.

Open potable water outlet

• Secures further operation of the rainwater system, even with a lack of rainwater
• Complete for the easiest of installations
• Fixed spacing of the inlet funnel to DIN standards
• Non-spraying potable water outlet through special jets
• Flexible connecting hose reduces water hammering
• Slowly closing magnetic valve also avoids water hammering

Complete feed set

• Composition of various components for a potable water feed
• Set ready for use, feeds the cistern with water in long, dry periods
• DVGW test seal
• Contains: ½” open potable water feed, floating switch for feed, intermediate plug.

Floating switch

For the potable water feed (yellow) and running-dry protection (red)

The floating switch for use in the rainwater storage cistern. Controls the potable water feed or switches the pump off at low water and thereby protects from dry-running.

Level indicator

Shows the water level in the cistern.
Pneumatic measuring appliance for remote measuring up to 50 m. Infinitely variable for tank heights of 1.00 to 2.50 m.

• Impact-resistant plastic housing
• 13 m measuring line
• with fixing parts

Smoothing inlet

Of stainless-steel. To prevent sediment being disturbed at the rainwater inlet in the cistern or in other containers. For inlet pipes DN 100 or less with reducing pieces.

Submersible pump (Provedo)

A pump with open wheel vanes for submersible use, with floating switch. For connecting to various filter/suction equipment on 1 ¼” suction outlets. Pressure outlets 1¼” .

• Large water pumping output with low difference in height
• All parts in contact with water are of stainless-steel
• Automatic switching through a floating switch
• 10 m connecting cable
• Use as loading (or supply) pump for hybrid systems
• Also available with hose protecting nozzle (used directly)

Submersible pump (Budrogo)

A pump with open wheel vanes for submersible use. For pumping clean water or  soiled water with particle sizes up to 10 mm diameter (no excrement). Pressure outlet 1 ¼”.

• Large water pumping output with low differences in height
• All parts in contact with water are of stainless-steel
• Automatic switching through a floating switch
• 10 m connecting cable
• Use as a normal soiled water pump.