 |
 |
AspriPlus Suction Pumps
-
For household rainwater utilization
-
For pumping pre-filtered rainwater out of the rainwater storage tank
-
For fast and easy installation, ready for connection
-
For connecting to various WISY suction filters in the cistern
-
With integrated dirt trap in the suction connection
-
With rubber feet fitted for cushioning vibrations
-
With automatic switch SA06
|
| |
|
- Multi-stage automatic rotary suction pump
- Corrosion-free suction and pressure housing of brass
- Pump casing, blades and shaft of stainless-steel
- Very smooth and quiet
- Thermal overload
- suction aid protection with disrupting air bubbles in the suction hose
- 2 years guarantee
|
 |
| The dirt catcher increases the operating safety of every
AspriPlus |
The proven WISY pumps include:
|
- Ready-sealed brass connection nipples on the suction and pressure sides
- Removable but sealing brass bolts between automatic switch and pump
- Assembled rubber feet for ideal noise insulation and safe installation on the WISY wall mounting
- Integrated safety dirt catcher of stainless-steel in the suction housing that, after removing the hose bolts, can be cleaned and used immediately without any aids
- Cabled ready for use with electrical plug and coupling
|
Operating / Output data
|
Model |
P1 input
Power KW |
Average
current A |
Max. pumping
height in m |
| AspriPLUS
15/3 |
0,61 |
2,7 |
35 |
|
AspriPLUS 15/4 |
0,70 |
3,5 |
45 |
|
AspriPLUS 15/5 |
0,95 |
4,1 |
53 |
|
|
Network voltage: |
230
V, 50Hz |
|
Max. current: |
10
A |
|
Max. operating pressure: |
10
bar |
|
Cut-in pressure with
automatic switch: |
1,5
bar |
|
Type of protection: |
IP 55 |
|
Connection thread: |
1
1/4" außen |
|
|
Automatic switch
|
Fully automatic control
The controls of the AspriPLUS are taken over by the automatic switch. It prevents water hammering in the pipework and protects the pump from running dry. The automatic switch works without maintenance.
It automatically switches on the pump when required, and off again when the tap is closed. |
Accessories
|
Hose connection between pump and supply pipe, with ballvalve.
-
Consists of a 1” pressure hose with pressed stainless-steel bushes, bolts and ballvalve
-
Also insulates against vibration and noise
-
Reduces the installation time considerably
Wall mounting
of stainless-steel with special fixings and rubber buffers:
|
 |
